|
FEATURES: FL12
(Patent Pending, Design Patent No: US D501,943 S).
SPECIFICATIONS: FL12
| Size: |
8.3" x 2.25" |
| Weight: |
5.4oz without / 12.8oz with batteries |
| Battery Type: |
3 "C" cell (not included) |
| Continuous Run-Time: |
~400 hours, ~8 hours at high brightness |
| Brightness: |
~720,000 mcd/~1060 Lux at beam center |
| LED: |
12 Nichia 5mm (white) |
| Beam Type: |
Combination (Spot with Flood) |
| Switch Type: |
Twist bezel ON/OFF |
| Water Proof: |
Submersible up to 15' |
| Box Contents: |
FL12 Flashlight, Instructions Manual |
| Warranty: |
1 yr Limited Warranty |
Anti-Roll Head
|
Super large fluted bezel prevents flashlight from accidentally rolling on smooth surfaces, such as an uneven work bench,
car hood, desks, chairs, or even on oddly shaped rocks.
|
|
Super High Intensity Beam
|
The FL12 achieves a brightness level of ~720,000 mcd with 12 Nichia LED's.
Similar 12 LED flashlights only produce ~80,000 mcd. Our new custom lens technology
allows us to achieve such high brightness levels without sacrificing power consumption.
Minimal power consumption means almost no heat is generated.
Click here for FL6/FL12 comparison.
|
|
Hands-Free Ceiling Bounce Mode
|
Easily stands on its bezel or tail end unassisted to illuminate an entire room
(use as a candle light). Multiple large openings at bottom of the flashlight allows for customized
lanyard attachments (not included), or any other attachments you can think of without affecting the
flashlight's ability to stand up on its own.
|
|
Unique Multi-Lens Array
|
The 12 white LEDs enhanced by our 6 custom optic lens generate a beam range
that is comparable to normal incandescent flashlights. Each one of the 12 LEDs
is carefully hand adjusted to maximize the effect of the projected beam.
The multi-lenses are cold molded into the head unit for unparalleled water tight protection,
and also makes the bezel unit stronger.
|
|
Ergonomic Grip
|
Slightly tapered body provides ergonomic comfort and prevents slippage even at a
near relaxed grip. This design gives the flashlight handle better styling versus
the traditional heavy knurled, sandpaper-like feel which maybe rough on sensitive hands.
|
|
Optics Enhanced Glow in The Dark Afterglow
|
Above the glow element, a custom lens (designed to produce a focused light) intensifies and
concentrates the glow at further range. The glow inside of the LED housing makes it easy to
locate the flashlight even after the unit powers OFF for up to 8 hours. Each time the unit
is activated, the glow element is automatically charged. The glow is visible
from all sides of the flashlight allowing it to sit in any position (even facing down on the
bezel) and still be easily located.
Click here for FL6/FL12 comparison.
|
|
Twist Head ON/OFF Switch
|
Rotating the head unit turns the flashlight on and off. The absence of a button switch
means no additional parts wear and tear as well as fewer openings for water, sand, or dust entry.
|
|
Quick Release Head Detachment
|
The first flashlight designed with a cantilever style mechanism combined with ball joint connections.
This enables quick release of bezel from the body for easy loading and unloading batteries even in the dark.
This innovative design yields both form and function while retaining the structural integrity of a normal flashlight.
|
|
Robust Design/Modern Materials
|
Only the highest quality material is used throughout the FL6. A combination of Polycarbonate,
Xenoy™ (Xenoy™ is a high impact, chemical resistant product by GE), and stainless steel contact springs are used to develop the flashlight.
|
|
Slow Battery Release
|
A special mechanism allows the batteries to fall out of the body unit one by one,
and not all at once. For example, changing batteries in a flashlight can be a
problem if you accidentally drop them. After all, our hands can only hold so much.
Slow release mechanism prevents batteries from accidentally falling out during battery changes.
|
|
